Magnetic Ink?

[FredBear]

One of the pieces of spam in my mailbox today mentioned selling "magnetic ink"
for use in printing the MICR line on blank check stock. Since I have a policy of
immediately deleting spam, I obviously did not go to this person's web site.

I am curious though. The inability of most banks to read non-magnetic coding put
a quick end to my experimentation with printing my own checks. Has someone
developed black ink with fine enough particles so as not to plug an ink jet
cart, or was this guy blowing smoke?

[LeeBos]

No, no smoke, see the following link.
http://www.g7ps.com/

[FredBear]

leebos@aol.com (LeeBos) wrote:
No, no smoke, see the following link.http://www.g7ps.com/

Interesting. May have to try a cart to see how well it works.....

[FredBear]

"Clark Wilhelm Griswold, Jr." <73115 dot 1041at compuserve com> wrote:
Interesting. May have to try a cart to see how well it works.....

Upon a little further research in my trash folder, I notice that these are the
same G7 clowns that have been sending spam for ages. Won't reward them for that.

[FredBear]

glenzabr@xmission.com (GMAN) wrote:
Most banks i believe nowadays use optical scanning of the coding.

Actually, that isn't true. While some its common at some banks & regions,
magnetic readers are much faster and less susceptible to scanning errors.

Furthermore, even if your bank does do optical scanning the problem is that you
can't guarantee that the receving bank will, and they are the ones that code the
check.

[John Pollard]

Clark Wilhelm Griswold, Jr. wrote: One of the pieces of spam in my mailbox today mentioned selling "magnetic ink" for use in printing the MICR line on blank check stock. Since I have a policy of immediately deleting spam, I obviously did not go to this person's web site. I am curious though. The inability of most banks to read non-magnetic coding put a quick end to my experimentation with printing my own checks. Has someone developed black ink with fine enough particles so as not to plug an ink jet cart, or was this guy blowing smoke?

Are you asking if there is such a thing as a MICR ink cartridge? The
answer is yes. If you are asking if there is MICR ink for an inkjet
printer, yes. Here is the first site I came upon, there may be
others. (Don't know whether this was your spammer's site).

http://makeashorterlink.com/?Z66616015

--
John Pollard
j underscore pollard at mindspring dot com

[Lee Babcock]

"Clark Wilhelm Griswold, Jr." wrote: One of the pieces of spam in my mailbox today mentioned selling "magnetic ink" for use in printing the MICR line on blank check stock. Since I have a policy of immediately deleting spam, I obviously did not go to this person's web site. I am curious though. The inability of most banks to read non-magnetic coding put a quick end to my experimentation with printing my own checks. Has someone developed black ink with fine enough particles so as not to plug an ink jet cart, or was this guy blowing smoke?

Magnetic ink for lasers is readily available and has been for years.
Any good rebuilder of toner cartridges will have these available.
Regards
Lee


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----

[Clark Wilhelm Griswold, Jr.]

"John Pollard" <willnotworkatall@hotmail.com> wrote:
Are you asking if there is such a thing as a MICR ink cartridge? Theanswer is yes. If you are asking if there is MICR ink for an inkjetprinter, yes. Here is the first site I came upon, there may beothers. (Don't know whether this was your spammer's site).



I know they have made MICR laser carts for a long time. Was surprised to see
them selling such an item as a MICR ink jet cartridge. The only way you can make
magnetic ink, at least economically, is to incorporate iron filings. Just having
a hard time believing the can do that without plugging up the jets.

Since the place selling these is a known major spammer, I'm highly suspect that
this is anything other than a private label cart with regular black ink.

[Clark Wilhelm Griswold, Jr.]

Lee Babcock <leebabcock@pathcom.com> wrote:
Magnetic ink for lasers is readily available and has been for years.Any good rebuilder of toner cartridges will have these available.

True. But that isn't ink, it's toner. Since toner consists of finely ground
polymers (among other things), it would be easy to incorporate some fine iron
dust in the blend.

[John Pollard]

Clark Wilhelm Griswold, Jr. wrote:
I know they have made MICR laser carts for a long time. Was surprised to see them selling such an item as a MICR ink jet cartridge. The only way you can make magnetic ink, at least economically, is to incorporate iron filings. Just having a hard time believing the can do that without plugging up the jets. Since the place selling these is a known major spammer, I'm highly suspect that this is anything other than a private label cart with regular black ink.

You may well be right, I have no personal experience with them. I
sure don't like spammers, but I'm not sure I'd assume they were
necessarily all frauds.

I was curious enough to call HP; they currently do not sell such a
product and they do not support such a product, and if that product
screwed up your printer, the warranty would be void. Of course, if HP
is hoping to sell such a product themselves one day, they probably
would not be rushing to support it from another company.

--
John Pollard
j underscore pollard at mindspring dot com

[Gary]

I printed up my own cheques one time when I ran out and needed some. It
just takes longer to clear because they get rejected by the auto reader and
need to be keyed by hand. So if you want more time on clearing...... :-)


"Clark Wilhelm Griswold, Jr." <73115 dot 1041at compuserve com> wrote in
message news:b3dkfvkqjgb2kgo8sphosk51savs6foj9p@4ax.com... One of the pieces of spam in my mailbox today mentioned selling "magnetic
ink" for use in printing the MICR line on blank check stock. Since I have a
policy of immediately deleting spam, I obviously did not go to this person's web
site. I am curious though. The inability of most banks to read non-magnetic
coding put a quick end to my experimentation with printing my own checks. Has someone developed black ink with fine enough particles so as not to plug an ink
jet cart, or was this guy blowing smoke?

[Clark Wilhelm Griswold, Jr.]

"Gary" <satellite77769@(removeme)hotmail.com> wrote:
And when I got the cheques back they had the same micr keying on a smallslip of paper taped to the bottom of my cheques.

Right. That indicates the bank had to manually re-encode your check because
their magnetic readers couldn't read it. Too many of those and some banks will
start charging a hefty per check fee for that... YMMV

[Bob Hosid]

With MICR printing of checks, the material used in the toner beside the
normal polymer materials is magnetite in very controlled amounts. There is
a special MICR font required called E13B which is the one that makes the
almost numbers at the bottom of your checks. That is the line that is read
and verified for bank usage. When people create checks from home
applications, that line is already completed on the check stock you get.
The Inkjet printers usually put in the name, amount etc.
The positioning on the MICR line is very precise as well as the required
"ClearSpace" around the E13B line -

Bob
"Clark Wilhelm Griswold, Jr." <73115.1041@compuserve.com> wrote in message
news:grbnfvsbdt56bo8b3lotnubkpo2hkptnm8@4ax.com... "Gary" <satellite77769@(removeme)hotmail.com> wrote:And when I got the cheques back they had the same micr keying on a smallslip of paper taped to the bottom of my cheques. Right. That indicates the bank had to manually re-encode your check
because their magnetic readers couldn't read it. Too many of those and some banks
will start charging a hefty per check fee for that... YMMV

[Jim]

They are going to go up anyway...


their magnetic readers couldn't read it. Too many of those and some
banks will start charging a hefty per check fee for that... YMMV