applebred l2 mod

[flekso]

could someone please take a look at this pic and tell me what bridges i have
to connect, and is this the new package (tougher to unlock) - if so any
advices on that one?

thanks

[flekso]

sorry, here's the link:

http://members.lycos.co.uk/muhaha1981/

[flekso]

"Nick M V Salmon" <spam@dump> wrote in message
news:3ff373d1$0$7005$cc9e4d1f@news.dial.pipex.com... "flekso" <taurus@email.hinet.hr> wrote sorry, here's the link: http://members.lycos.co.uk/muhaha1981/ It's the new packaging but you're in luck - all the L1 bridges are intact, so it's already unlocked...

sorry, i didn't state the question properly (in more than one way) - i'm
trying to re-enable the L2 cache

[Nick M V Salmon]

"flekso" <taurus@email.hinet.hr> wrote sorry, here's the link: http://members.lycos.co.uk/muhaha1981/

It's the new packaging but you're in luck - all the L1 bridges are intact,
so it's already unlocked...

[Wayne Youngman]

"Nick M V Salmon" wrote It's the new packaging but you're in luck - all the L1 bridges are intact, so it's already unlocked...


Hi Nick,
long time no see? hope you had a good xmas/new-years. Where you been
hanging out? (Climate Prediction boards?). I tried to send you an xmas
greeting but the mail address I have for you has been cut?.

All the best,
--
Wayne ][

[Nick M V Salmon]

"flekso" <taurus@email.hinet.hr> wrote "Nick M V Salmon" <spam@dump> wrote "flekso" <taurus@email.hinet.hr> wrote sorry, here's the link: http://members.lycos.co.uk/muhaha1981/ It's the new packaging but you're in luck - all the L1 bridges are
intact, so it's already unlocked... sorry, i didn't state the question properly (in more than one way) - i'm trying to re-enable the L2 cache

I tried that with three of these 1.6GHz CPUs and none were stable with it
re-enabled. (They're all in the old brown package.) I think you're out of
luck modifying anything with the new packaging - you can still cut a bridge
but there's no way to rejoin them that I know of - you have to rejoin the
4th L2 bridge to re-enable the extra L2 cache. They'll all run at circa
2.3GHz though, not bad for a £35 CPU.

Ciao...

[UK]_Nick...
--
Nick M V Salmon Master Mariner MN(Retd.)
Email: My four initials at dsl dot pipex dot com
http://www.nmvs.dsl.pipex.com/index.htm

[Nick M V Salmon]

"Wayne Youngman" <waynes.spamtrap@btopenworld.com> wrote long time no see? hope you had a good xmas/new-years.

No three bad & likewise...

Where you been hanging out? (Climate Prediction boards?).

Mostly, although I do read the newsgroups too.

I tried to send you an xmas greeting but the mail address I have for you has been cut?.

I moved back to Pipex for 256/1024 ADSL - usual four initials @dsl.pipex.com

Ciao...

[UK]_Nick...
--
Nick M V Salmon Master Mariner MN(Retd.)
Email: My four initials at dsl dot pipex dot com
http://www.nmvs.dsl.pipex.com/index.htm

[flekso]

"Nick M V Salmon" <spam@dump> wrote in message
news:3ff46544$0$7008$cc9e4d1f@news.dial.pipex.com... "flekso" <taurus@email.hinet.hr> wrote "Nick M V Salmon" <spam@dump> wrote "flekso" <taurus@email.hinet.hr> wrote > sorry, here's the link: > > http://members.lycos.co.uk/muhaha1981/ > It's the new packaging but you're in luck - all the L1 bridges are intact, so it's already unlocked... sorry, i didn't state the question properly (in more than one way) - i'm trying to re-enable the L2 cache I tried that with three of these 1.6GHz CPUs and none were stable with it re-enabled. (They're all in the old brown package.) I think you're out of luck modifying anything with the new packaging - you can still cut a
bridge but there's no way to rejoin them that I know of - you have to rejoin the 4th L2 bridge to re-enable the extra L2 cache. They'll all run at circa 2.3GHz though, not bad for a £35 CPU. Ciao... [UK]_Nick... -- Nick M V Salmon Master Mariner MN(Retd.) Email: My four initials at dsl dot pipex dot com http://www.nmvs.dsl.pipex.com/index.htm

in my case it's woohoo!
256 cache + no problems

although i can't get it stable with fsb over 184 - don't know who's the
culprit yet, could be the vdd(don't have the bios option), ram(although it's
rated ddr400 8-3-3-3 it does have some quirks) or the cpu itself - any clues
on this one?

current settings:
xp 2255Mhz, 166FSB, 1.75V,
1*512 @ 333Mhz ram, 3-2-2-2.5, 2.9V
agp 1.5V
vdd 1.6(supposedly)

i can also get it stable @ 2.3Ghz, 184FSB with 1.8V but with slower ram
timing(8-3-3-3) - which is better in my case ?

thanks