Thanks for the tip, I tried what you recomeded but it was not able to
fix the problem. I'll attach the error log below. Any other help
would be appriciated.
AutoFix [V5.2.3790.67]
Time [2004-04-05 13:41:15]
Microsoft Windows Version [5.1 (Service Pack 1) <2600>]
Test [The Shell Hardware Detection service is running.] - Instance
[N/A]:
Result [AutoStart Setting]: OK
Result [The Shell Hardware Detection service is running.]: OK
Test [Policies] - Instance [I:\, Drive Type: 5]:
Result [HKCU\...\Policies!NoDrives]: OK {Absent}
Result [HKCU\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKCU\...\Policies!NoDriveTypeAutorun]: OK {Present}
Result [HKLM\...\Policies!NoDrives]: OK {Absent}
Result [HKLM\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKLM\...\Policies!NoDriveTypeAutorun]: OK {Absent}
Result [Driver level policies]: OK {
HKLM\...\Services\cdrom!Autorun (Present) <Allows>
HKLM\...\Services\cdrom\Parameters!Autorun (Absent) <Allows>
HKLM\System\CCS\Enum\...!AlwaysEnable (Absent) <Not set>
HKLM\System\CCS\Enum\...!AlwaysDisable (Absent) <Not set> }
Test [Drive Notification] - Instance [I:\, Drive Type: 5]:
Result [Legacy Notification]: Problems
Result [AutoPlay V2 Notification]: Problems {
Service (Silent)
Shell (Deaf) } Repair << [Legacy AutoPlay Event]
Step: No steps to take.
Result: This AutoPlay setting cannot be fixed. Either the device
is malfunctioning, or the wizard cannot determine the problem. Repair << [Autoplay V2 Event]
Step: No steps to take.
Result: This AutoPlay setting cannot be fixed. Either the device
is malfunctioning, or the wizard cannot determine the problem.
Required action: The wizard found problems but cannot fix them ->
None
smh <smhong@mindspring.com> wrote in message news:<5c0cef96ea7974a934a924bac0f60950@news.bubbanews.com>... . -------------------------------------- Mike Richter, were you born with "Scam Artist" emblazoned on your face? -------------------------------------- (Mike Richter, any Material Connection w/ Roxio?) http://groups.google.com/groups?selm=3F2D8973.EBCD8386@mindspring.com (Messages 10, 12 -- 34, 54 -- 69) ( No pipsqueaks have been able to prove ANY of the above is a libel ) ( -- despite Mikey's supposed to have proof of misquotes!!! ) new2this wrote: I have an Artec WRA-WA48 CD-Burner that has begun acting strangely. Now, when I insert any CD, either blank or not, it acts like it is trying to read it, that is to say that the light blinks periodically and in XP the CD symbol blinks above the cursor. That is what it has normally done but instead of the message popping up and asking me what I want to do with the disk the light on the drive begins blinking very rapidly and it does this until the disk is ejected. The disk ejects quickly, as quickly as when there is no disk in the drive. I cannot figure out what is happening with the drive, any help would be appreciated. Try "Autoplay Repair Wizard" ? http://www.microsoft.com/downloads/details.aspx?FamilyID=c680a7b6-e8fa-45c4-a171-1b389cfacdad