View Full Version : Wireless: LinkSys WLAN Monitor (ver. 1.2) Does Not Show Correct MAC Address
Have 2 PCs on wireless architecture-type network. After a couple hours
of trying to get them to talk to each other (via a LinkSys WAG54G-UK
Gateway) I thought to check the MAC Addresses of both adapters.
Both LinkSys WMP54G PCI Adapters arrived with the exact same MAC
Addresses! No wonder. I changed one of the MAC addresses and
low-and-behold communication.
This was done by setting the WMP54G Locally Administered MAC Address
via the Adapter Properties Advanced Tab.
I've rebooted, reseated the PCI Adapter, deleted and reinstalled and
every other thing to see if the WLAN Monitor would report the locally
administered MAC address. No change. The WLAN Monitor still reports
the INCORRECT MAC Address.
I can live with it myself and have reported it to LinkSys
International and thought to share this info in the hope it will be
helpful to someone that runs into the same problem.
Mike
MyLounge.com Site Map
Forum:
Cars,
Cell Phone,
Database,
Games,
Home Improvement,
IT,
Music,
School,
Sports,
Web Design,
Web Server,
Weight Loss
The MyLounge.com forum is intended for informational use only and should not
be relied upon and is not a substitute for any advice. The information contained
on MyLounge.com are opinions and suggestions of members and is not a representation
of the opinions of MyLounge.com. MyLounge.com does not warrant or vouch for
the accuracy, completeness or usefulness of any postings or the qualifications
of any person responding. Please consult a expert or seek the services of an
attorney in your area for more accuracy on your specific situation. Please note
that our forums also serve as mirrors to Usenet newsgroups. Many posts you see
on our forums are made by newsgroup users who may not be members of MyLounge.com
Term of Service
vBulletin v3.0.7, Copyright ©2000-2009, Jelsoft Enterprises Ltd.