NeXT 400dpi Laser Printer, Ozone Filter?

[Dante McLean]

Hi:

Wondering if there is a source around still for NeXT Laser Printer ozone
filter. Judging by the stench, it is time to replace mine. If it is
not still around, would HP LaserJet II/III part fit, or part from
something else?

Thanks.

--
Regards,


Dante McLean
Dante McLean Photography
dante.mclean@sympatico.ca --> NeXTmail soon to be welcome!
dmclean@acs.ryerson.ca

DS16 #19
"A Humming Bird"
Christian Island, Ontario
N44° 51.472' W080° 12.349'

[Michael]

Dante McLean <dante.mclean@sympatico.ca> wrote in message news:<4001B4BD.6080002@sympatico.ca>... Hi: Wondering if there is a source around still for NeXT Laser Printer ozone filter. Judging by the stench, it is time to replace mine. If it is not still around, would HP LaserJet II/III part fit, or part from something else?

I am wondering the same thing, threw mine away sometime ago and
needless to say, I haven't used my NeXT Laser Printer since then. I
am going to try to use one from a LaserJet II.

Yours Truly,


Michael

[Art Beattie]

In article <e6bfec60.0401292148.7395c67c@posting.google.com>,
ibookcomputerguy@mac.com (Michael) wrote:
Dante McLean <dante.mclean@sympatico.ca> wrote in message news:<4001B4BD.6080002@sympatico.ca>... Hi: Wondering if there is a source around still for NeXT Laser Printer ozone filter. Judging by the stench, it is time to replace mine. If it is not still around, would HP LaserJet II/III part fit, or part from something else? I am wondering the same thing, threw mine away sometime ago and needless to say, I haven't used my NeXT Laser Printer since then. I am going to try to use one from a LaserJet II.

You might check out

http://fixyourownprinter.com

There were 41 hits on "ozone" at this site. I have not tried to deal
with this vender yet but plan to. Good luck.

[Michael]

Asked Randy and he said, there's no solution, so I tried looking and I
can't find one either. The only feasible alternative I can see, would
be to purchase carbon fiber layers and custom cut them for the NeXT
Laser Printer, since an ozone filter is nothing more than a block of
carbon fiber.

Most robotics shops carry carbon fiber sheets, they usually make them
up to 1/8 thick, so you would need a few layers to match the width of
the ones used in the NeXT Laser Printer. If you go this route, make
sure to wear protective goggles, a mask, and gloves, and that you also
wear long sleeves.

Yours truly,

Michael

[Michael]

ibookcomputerguy@mac.com (Michael) wrote in message news:<e6bfec60.0402051506.674740d4@posting.google.com>... Asked Randy and he said, there's no solution, so I tried looking and I can't find one either. The only feasible alternative I can see, would be to purchase carbon fiber layers and custom cut them for the NeXT Laser Printer, since an ozone filter is nothing more than a block of carbon fiber. Most robotics shops carry carbon fiber sheets, they usually make them up to 1/8 thick, so you would need a few layers to match the width of the ones used in the NeXT Laser Printer. If you go this route, make sure to wear protective goggles, a mask, and gloves, and that you also wear long sleeves. Yours truly, Michael

Rest assured, the custom cut carbon fiber sheets works better than the originals.

Mike

[Cute Swinger 8\)]

--
Start the New Year off with some adult toys
Or movies!! Best prices around!
FAST & Discrete shipping!

http://www.sextoysex.com/a2k4
-=-=-=-=-=-=-=-=-=--=-=-=-
Looking to Find a Date?? With a REAL PERSON??

http://68.82.94.85:2000/Public/singles.htm
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Looking to find local swingers & hookups?
Couples? Singles? SEARCH BY ZIPCODE!
100% FREE

http://68.82.94.85:2000/public/swingers/index.htm
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

You can also checkout our NEW all GAY site at

http://68.82.94.85:7000


"Michael" <ibookcomputerguy@mac.com> wrote in message
news:e6bfec60.0403011513.43a4af31@posting.google.com... ibookcomputerguy@mac.com (Michael) wrote in message
news:<e6bfec60.0402051506.674740d4@posting.google.com>... Asked Randy and he said, there's no solution, so I tried looking and I can't find one either. The only feasible alternative I can see, would be to purchase carbon fiber layers and custom cut them for the NeXT Laser Printer, since an ozone filter is nothing more than a block of carbon fiber. Most robotics shops carry carbon fiber sheets, they usually make them up to 1/8 thick, so you would need a few layers to match the width of the ones used in the NeXT Laser Printer. If you go this route, make sure to wear protective goggles, a mask, and gloves, and that you also wear long sleeves. Yours truly, Michael Rest assured, the custom cut carbon fiber sheets works better than the
originals. Mike