[Cube] NeXT Dimension Card on a Cubo040 non-adb?

[Gia.]

Hi.
Is it possible to use a "Dimension Card" with a NonADB Cube 68040
system?


Thanks,
Giampiero

[Lucio]

Gia. <palgiNOSPAM@libero.it> wrote:
Hi. Is it possible to use a "Dimension Card" with a NonADB Cube 68040 system?

Si, e' possibile.
Mi stai nascondendo qualcosa, marrano? ;-)

--
Lucio
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|l|u|c|i|o|f|@|l|e|n|i|n|g|r|a|d|o|.|c|o|m|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

[Gia.]

Lucio <leggi_la_sign@libero.it> wrote:
Hi. Is it possible to use a "Dimension Card" with a NonADB Cube 68040 system? Si, e' possibile.

Fine, thanks. :-)
Of course, I need a SoundBox and a rare Y-Cable, do I?

Regards,
Giampiero

[David Evans]

In article <1gm46gi.fl2ero18dnx24N%palgiNOSPAM@libero.it>,
Gia. <palgiNOSPAM@libero.it> wrote:Is it possible to use a "Dimension Card" with a NonADB Cube 68040system?

Yes; that's what my cube has in it. You can actually use an ND board
in any cube that has an NBIC on the CPU board. Even an '030, if you
like pain.

You don't need a Y-cable, since the ND has its own 13w3 monitor
connector. You can use a sound box for the mouse and keyboard, or
attach a mono monitor and run dual-headed. Depending on your power
supply version, you may pretty much have to take this route: early cube
power supplies aren't too fond of staying turned on if there is little
load on the -12V line. There are workarounds involving soldering power
resistors inside the sound box, but obviously that's kind of annoying.

--
David Evans dfevans@bbcr.uwaterloo.ca
Research Associate, Ph.D. Candidate http://bbcr.uwaterloo.ca/~dfevans/
University of Waterloo "Default is the value selected by the composer
Ontario, Canada overridden by your command." - Roland TR-707 Manual

[Gia.]

David Evans <dfevans@bcr10.uwaterloo.ca> wrote:
Is it possible to use a "Dimension Card" with a NonADB Cube 68040system? Yes; that's what my cube has in it. You can actually use an ND board in any cube that has an NBIC on the CPU board. Even an '030, if you like pain.

Ok.

You don't need a Y-cable, since the ND has its own 13w3 monitor connector.

That's a good new.
I saw some picture of the ND and its 13w3 connector (female or male?).

You can use a sound box for the mouse and keyboard, or attach a mono monitor and run dual-headed.

And what about the connection between soundbox and ND? Is it a standard
13w3?


Thanks,
Giampiero

[David Evans]

In article <1gm4k2w.gi81vbfa31jkN%palgiNOSPAM@libero.it>,
Gia. <palgiNOSPAM@libero.it> wrote:David Evans <dfevans@bcr10.uwaterloo.ca> wrote: You don't need a Y-cable, since the ND has its own 13w3 monitor connector.That's a good new.I saw some picture of the ND and its 13w3 connector (female or male?).

Well, that's a little hard to define for 13w3, isn't it? :-) Anyway,
it's the one you would expect to find on a workstation.
You can use a sound box for the mouse and keyboard, or attach a mono monitor and run dual-headed.And what about the connection between soundbox and ND? Is it a standard13w3?

The sound box plugs into the CPU board, not into the ND. No 13w3
anywhere.

--
David Evans dfevans@bbcr.uwaterloo.ca
Research Associate, Ph.D. Candidate http://bbcr.uwaterloo.ca/~dfevans/
University of Waterloo "Default is the value selected by the composer
Ontario, Canada overridden by your command." - Roland TR-707 Manual

[Gia.]

David Evans <dfevans@bcr10.uwaterloo.ca> wrote:
You don't need a Y-cable, since the ND has its own 13w3 monitor connector.That's a good new.I saw some picture of the ND and its 13w3 connector (female or male?). Well, that's a little hard to define for 13w3, isn't it? :-) Anyway, it's the one you would expect to find on a workstation.

Ok. When I'm able to find a ND, i'll find the way to connect it to a
nonNeXT display. :-)

You can use a sound box for the mouse and keyboard, or attach a mono monitor and run dual-headed.And what about the connection between soundbox and ND? Is it a standard13w3? The sound box plugs into the CPU board, not into the ND. No 13w3 anywhere.

OK (my brother has got one of this soundbox, but I never user it).

Thanks.
Giampiero

--
David Evans, Ph.D. Candidate
PhD Candidate? Do I! :o) (here: Maths...)

[Andreas Berger]

Gia. schrieb: You don't need a Y-cable, since the ND has its own 13w3 monitor connector.

---- snip ---- You can use a sound box for the mouse and keyboard, or attach a mono monitor and run dual-headed.
And what about the connection between soundbox and ND? Is it a standard 13w3?

There is NO connection between ND and soundbox. The color monitor
connected via straight 13W3 to the ND board. The soundbox connected via
mono-monitorcable, the same as for the mono-monitors, to the cube
motherboard. keyboard ans mouse are connected to the soundbox.

regards, Andreas

[Gia.]

Andreas Berger <a_berger@despammed.com> wrote:
And what about the connection between soundbox and ND? Is it a standard 13w3? There is NO connection between ND and soundbox. The color monitor connected via straight 13W3 to the ND board. The soundbox connected via mono-monitorcable, the same as for the mono-monitors, to the cube motherboard. keyboard ans mouse are connected to the soundbox.

Perfect! Now, I need only a ND, but it doesn't seem simple to fid it.

Thanks, Gia.

[Cute Swinger 8\)]

--
Start the New Year off with some adult toys
Or movies!! Best prices around!
FAST & Discrete shipping!

http://www.sextoysex.com/a2k4
-=-=-=-=-=-=-=-=-=--=-=-=-
Looking to Find a Date?? With a REAL PERSON??

http://68.82.94.85:2000/Public/singles.htm
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Looking to find local swingers & hookups?
Couples? Singles? SEARCH BY ZIPCODE!
100% FREE

http://68.82.94.85:2000/public/swingers/index.htm
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

You can also checkout our NEW all GAY site at

http://68.82.94.85:7000


"Gia." <palgiNOSPAM@libero.it> wrote in message
news:1gm46gi.fl2ero18dnx24N%palgiNOSPAM@libero.it... Hi. Is it possible to use a "Dimension Card" with a NonADB Cube 68040 system? Thanks, Giampiero