IT Forums - Looking for DDS4 DAT Drive Compatible with HPUX B.10.20 A and HP 9000/785

Dave Humes

11-03-2003, 01:41 PM

Hello,

I'm putting together a system based on an HP 9000/785 (J6000) and need to
include a 4mm DAT drive that I'm putting in an external enclosure. If
anyone can recommend a drive that they know works with this hardware and
HPUX B.10.20 A, I would appreciate your inputs. The SCSI bus is narrow, so
I'd prefer a drive with the old 50-pin IDC connector. I know I can use an
adapter, but won't know if it will fit in the enclosure until I get all the
pieces.

Thanks.

--Dave

The MyLounge.com forum is intended for informational use only and should not be relied upon and is not a substitute for any advice. The information contained on MyLounge.com are opinions and suggestions of members and is not a representation of the opinions of MyLounge.com. MyLounge.com does not warrant or vouch for the accuracy, completeness or usefulness of any postings or the qualifications of any person responding. Please consult a expert or seek the services of an attorney in your area for more accuracy on your specific situation. Please note that our forums also serve as mirrors to Usenet newsgroups. Many posts you see on our forums are made by newsgroup users who may not be members of MyLounge.com Term of Service