View Full Version : Stray part in HP Deskjet 1220C
jkred
11-05-2003, 02:52 PM
I was cleaning this printer and I found a little white plastic part
sitting on the input tray. I cannot find any part that matches it in
the exploded views in the service manual, or on HP's site. I've asked
this question there with no response.
The part is a square tubular part, with two prongs on the other end of
the square opening. It is maybe 1 inch long, maybe 1/3 inch wide. It
was clean. It looks like some kind of a support, and obviously snaps
in somewhere.
So far, I've taken the cover and the two sides off, and I cannot see
anyplace it might fit into.
If anyone has any knowledge of where this part goes, please let me
know.
Thank you.
jmred
chuckieŽ
11-05-2003, 03:36 PM
The obvious question is: Is the printer functioning properly? If so, hold onto the part for future
reference. It is within the realm of possibility that it is just an extra that fell into the works
during the assembly process, and, therefore, has no particular purpose at this time. If the printer
is NOT functioning properly, the purpose for the part should be readily apparent....luck...
"jkred" <k280zx@pacbell.net> wrote in message
news:e46f3ae1.0311051452.14ee4e74@posting.google.com... I was cleaning this printer and I found a little white plastic part sitting on the input tray. I cannot find any part that matches it in the exploded views in the service manual, or on HP's site. I've asked this question there with no response. The part is a square tubular part, with two prongs on the other end of the square opening. It is maybe 1 inch long, maybe 1/3 inch wide. It was clean. It looks like some kind of a support, and obviously snaps in somewhere. So far, I've taken the cover and the two sides off, and I cannot see anyplace it might fit into. If anyone has any knowledge of where this part goes, please let me know. Thank you. jmred
Mirko S Veselinovic
11-09-2003, 09:31 AM
On 5 Nov 2003 14:52:16 -0800, k280zx@pacbell.net (jkred) wrote:
I was cleaning this printer and I found a little white plastic partsitting on the input tray. I cannot find any part that matches it inthe exploded views in the service manual, or on HP's site. I've asked
Where one can find a service manual for 1220C?
MyLounge.com Site Map
Forum:
Cars,
Cell Phone,
Database,
Games,
Home Improvement,
IT,
Music,
School,
Sports,
Web Design,
Web Server,
Weight Loss
The MyLounge.com forum is intended for informational use only and should not
be relied upon and is not a substitute for any advice. The information contained
on MyLounge.com are opinions and suggestions of members and is not a representation
of the opinions of MyLounge.com. MyLounge.com does not warrant or vouch for
the accuracy, completeness or usefulness of any postings or the qualifications
of any person responding. Please consult a expert or seek the services of an
attorney in your area for more accuracy on your specific situation. Please note
that our forums also serve as mirrors to Usenet newsgroups. Many posts you see
on our forums are made by newsgroup users who may not be members of MyLounge.com
Term of Service
vBulletin v3.0.7, Copyright ©2000-2009, Jelsoft Enterprises Ltd.