Replaced paper pickup in LJ III, now paper jam

[Jeff Fox]

I just replaced the paper pickup assembly with one from a donor machine.
When I run the self test I get a paper jam error. The paper
pickup does not move at all. The relays on the module on the right side
both click once.
I can turn the gears manually on the paper pickup and get a piece of paper
to move through the paper path.

My guess is there is a way to index the paper pickup after re-assembly
but I don't know how. I have turned the paper pickup to several different
orientations between tests but same results.

Any ideas?

[Chris Prestwich]

Did you plug the motor connector back in? [if you unplugged it]

On Tue, 23 Dec 2003 11:10:41 -0600, Jeff Fox <jfox@airmail.net> wrote:
I just replaced the paper pickup assembly with one from a donor machine.When I run the self test I get a paper jam error. The paperpickup does not move at all. The relays on the module on the right sideboth click once.I can turn the gears manually on the paper pickup and get a piece of paperto move through the paper path.My guess is there is a way to index the paper pickup after re-assemblybut I don't know how. I have turned the paper pickup to several differentorientations between tests but same results.Any ideas?

__ __ __ __ __
Regards, Chris
[spamblock used]

[Jeff Fox]

On Wed, 24 Dec 2003 15:45:55 +1100, Chris Prestwich wrote:
Did you plug the motor connector back in? [if you unplugged it]
Well of course .... Doh!

Amazing how I missed that, thanks a lot!