I have been using a Netgear MR314 router for some time now, and it's
always been fine. I have two PCs wired to it and a portable usually
connecting via wireless.
Recently I started to get an intermittent problem where Windows would
say the cable was unplugged and the router would go off-line, with the
Test led flashing. You could see, by the pattern of lights going on and
off that it was in test mode (as per it's boot sequence). Sometimes it
would come back on-line fairly quickly, other times not for a long time.
I've tried powering it off (sometimes for a few minutes, sometimes for a
couple of hours), resetting it, resetting it another way (as advised by
Netgear) - none of these things solve the problem - if it's 'dead' when
I power off it is still dead when I power up again. Then it will start
working ok, for no apparent reason.
I tried swapping cables around, etc. and could not pin the problem down
to any one thing, so I concluded that the router was faulty.
I got a new Netgear WGR614 router, and that has been working fine for a
while now. So... it was the MR314, it seems.
Lately I decided to test the MR314 again, just with the portable (wired
connection this time) and an old PC. Now it seems to be working ok. It
did drop out once but recovered and has been ok for several hours now.
The only other symptom I can think of is that during the problem period
we were having exceptionally hot weather. Are routers heat-sensitive, do
you think?
I'd just like to get some idea of what the problem actually is/was, for
future reference. Any thoughts, similar experiences?
The only other symptom I can think of is that during the problem period we were having exceptionally hot weather. Are routers heat-sensitive, do you think?
Yes, just like any other piece of electronics. I really think routers
should be actively cooled with fans and heat fins. Of course this would
cause a lot of noise and annoyance to people, so it looks like the
manufacturers won't be going that direction anytime soon.
This isn't isolated to Netgear. I've had similar problems with Dlinks
and Linksys.
On Wed, 16 Aug 2006 08:25:08 GMT, John Fryatt <jrf1@ntlworld.com> wrote:
Quote:
Hi all,I have been using a Netgear MR314 router for some time now, and it'salways been fine. I have two PCs wired to it and a portable usuallyconnecting via wireless.Recently I started to get an intermittent problem where Windows wouldsay the cable was unplugged and the router would go off-line, with theTest led flashing. You could see, by the pattern of lights going on andoff that it was in test mode (as per it's boot sequence). Sometimes itwould come back on-line fairly quickly, other times not for a long time.I've tried powering it off (sometimes for a few minutes, sometimes for acouple of hours), resetting it, resetting it another way (as advised byNetgear) - none of these things solve the problem - if it's 'dead' whenI power off it is still dead when I power up again. Then it will startworking ok, for no apparent reason.I tried swapping cables around, etc. and could not pin the problem downto any one thing, so I concluded that the router was faulty.I got a new Netgear WGR614 router, and that has been working fine for awhile now. So... it was the MR314, it seems.Lately I decided to test the MR314 again, just with the portable (wiredconnection this time) and an old PC. Now it seems to be working ok. Itdid drop out once but recovered and has been ok for several hours now.The only other symptom I can think of is that during the problem periodwe were having exceptionally hot weather. Are routers heat-sensitive, doyou think?I'd just like to get some idea of what the problem actually is/was, forfuture reference. Any thoughts, similar experiences?John
Could certainly be heat related, especially if the guts are covered with
accumulated dust bunnies. Use a grounding strap, open it up and clean it out,
then see if it's a happier router.
The only other symptom I can think of is that during the problem period we were having exceptionally hot weather. Are routers heat-sensitive, do you think?
Yes, just like any other piece of electronics. I really think routers should be actively cooled with fans and heat fins. Of course this would cause a lot of noise and annoyance to people, so it looks like the manufacturers won't be going that direction anytime soon. This isn't isolated to Netgear. I've had similar problems with Dlinks and Linksys. Yousuf Khan
Ok, thanks for that. I tend to agree re. cooling. Some bits of equipment
do seem, to me, to get pretty hot. While it doesn't seem to make them
fail straight away, it can't be good for their longevity.
On Wed, 16 Aug 2006 08:25:08 GMT, John Fryatt <jrf1@ntlworld.com> wrote:
Quote:
Hi all, I have been using a Netgear MR314 router for some time now, and it's always been fine. I have two PCs wired to it and a portable usually connecting via wireless. Recently I started to get an intermittent problem where Windows would say the cable was unplugged and the router would go off-line, with the Test led flashing. You could see, by the pattern of lights going on and off that it was in test mode (as per it's boot sequence). Sometimes it would come back on-line fairly quickly, other times not for a long time. I've tried powering it off (sometimes for a few minutes, sometimes for a couple of hours), resetting it, resetting it another way (as advised by Netgear) - none of these things solve the problem - if it's 'dead' when I power off it is still dead when I power up again. Then it will start working ok, for no apparent reason. I tried swapping cables around, etc. and could not pin the problem down to any one thing, so I concluded that the router was faulty. I got a new Netgear WGR614 router, and that has been working fine for a while now. So... it was the MR314, it seems. Lately I decided to test the MR314 again, just with the portable (wired connection this time) and an old PC. Now it seems to be working ok. It did drop out once but recovered and has been ok for several hours now. The only other symptom I can think of is that during the problem period we were having exceptionally hot weather. Are routers heat-sensitive, do you think? I'd just like to get some idea of what the problem actually is/was, for future reference. Any thoughts, similar experiences? John
Could certainly be heat related, especially if the guts are covered with accumulated dust bunnies. Use a grounding strap, open it up and clean it out, then see if it's a happier router.
Good idea. I'll try it. I do clean out my PCs from time to time, but
never thought of it for the router.
The MyLounge.com forum is intended for informational use only and should not
be relied upon and is not a substitute for any advice. The information contained
on MyLounge.com are opinions and suggestions of members and is not a representation
of the opinions of MyLounge.com. MyLounge.com does not warrant or vouch for
the accuracy, completeness or usefulness of any postings or the qualifications
of any person responding. Please consult a expert or seek the services of an
attorney in your area for more accuracy on your specific situation. Please note
that our forums also serve as mirrors to Usenet newsgroups. Many posts you see
on our forums are made by newsgroup users who may not be members of MyLounge.com
Term of Service
Intermittent router problem - advice appreciated
Linear Mode
